JM Rubber Machinery
CURRENT INVENTORY QUICK LINKS |
mixers
|
mills
|
calenders
|
presses
|
extruders
|
miscellaneous
|
tire machinery
Home
/
Featured Items
/
Featured Items
Farrel 80 Liter Rubber Mixing - Sheeting- Batchoff Sheet or Strip
F80 Farrel Banbury Mixing Line designed, engineered, installed, maintained and upgraded by Farrel, Original installation 1974
2- Overhead Conical Batch Blenders
for dry additives with Nauta type Mixer mounted on them tied into weigh scales and charging into the chute on back door of Banbury Hopper. An overhead process oil holding tank farm with 3 different oil pumps and weighing units injection into batch via injection nozzle and pumping system
30" wide Hydraulic Bale Cutter Assembly
complete with entrance rollers, Guillotine, take away conveyor drops onto a motorized Banbury Charging Conveyor ending at Banbury Charging Station where Operator Control Panel is located for operating Hopper charging door
(1) Farrel F80 Banbury Mixer
, 11" diameter High Pressure Hopper cylinder with 2.5" rod onto Farrel SSV bottom hardened and chromed floating weight, Body Serial # 84A1315 is a full Unidrive Construction Body consisting of Roller style Rotor Bearings, 2 wing hard surfaced rotors cored for water cooling with rotary unions, Drilled Sides for water temperature control, Hardened Drop Door water cooled with rotary union and driven by Hydraulic Rotary Actuator with hydraulic unit, Farrel 3 zone Temperature Control Unit, ( TCU) motorized automatic grease lubrication system, motorized dust stop lube pumps, Farrel Model #663A Parallel shaft, roller bearing Unidrive Gear Reducer 12.26:1 ratio, 876 HP rated serial #74-A1751, (1) General Electric 2 speed 500/250 HP @ 885/440 rpm, 4000/3/60 AC Motor and control s with Operator Control Station
22"x22"x60" Farrel Drop Mill
, Serial #74A17, Drilled front roll with cored rear drive roll each with rotary union for water cooling, inboard and outboard seals for closed loop flood oil lubrication system, Direct Drive thru Heavy Duty Alten Parallel shaft 38.44:1 ratio roller bearing gear reducer rated 233 HP, driven by geared high speed coupling to General Electric 150 HP 880 rpm 440/3/60 AC Motor, all unitized on a heavy duty factory box beam unibase, floor level with vibration isolation/leveling pads, strip knife assembly to feed take away conveyor of Batchoff
Akron Standard Type 30" Fixed Bar Batchoff Unit
with pneumatic operated takeaway conveyor fed from knife bar feeding takeaway conveyor onto dip chain through water and soapstone solution onto a 30" wide fixed looped bar fan cooled 55' cooling section into cutting are for slab or strip onto a stacker pallet weigh scale The Master electrics, Mezzanine, Equipment, all maintenance, body and bearing changes performed by Farrel. Manuals and drawings as available. Equipment still installed, excellent condition. We will only sell as a package as plant is still operating and removal could slow down their production, so we are doing complete lines only as we did the Calendering Line here.
Use the check boxes to indicate items interested in and click on "request a quote" button to receive a quotation on any above equipment.
Be sure the check mark shows in the box next to the equipment you are interested in when requesting a quote.
Example
Rubber Machinery
Mixer Info
Mill Info
Calender Info
Press Info
Extruder Info
Miscellaneous Info
Tire Machinery
Before & After
Featured Items
Related Links
Your Surplus
Trade Shows
Press Releases
Conversion Charts
Links
Company Information
JM Machinery
PO Box 378
Wadsworth, OH 44282
330.825.2401 phone
330.825.0569 fax
About JM
| ©1991-2012 JM Machinery